What are the precautions for glazed ceramic mosaic paving?

Glazed ceramic mosaic is a very popular decorative element in home decoration in recent years. Because of its excellent decorative effect, it has received more and more welcome. With the development of time, the construction of glazed ceramic mosaic is also constantly innovating and changing. The following are the precautions for the construction of glazed ceramic mosaic, let's take a look.

Here is the content list:

• Paving accessories selection

• Consider the construction thickness

• The spacing of construction joints should be even

• Prepare the construction rhythm

• Jointing with a caulking agent

• After shop care

Paving accessories selection

Generally, tile glue can be used when paving tiles, but if it is paving glazed ceramic mosaic tiles, it is recommended to use Boma glue products dedicated to paving mosaics. Because the density of glazed ceramic mosaic tiles is relatively high, the water absorption rate is low, and it is easy to corrode. Although the bonding effect of ordinary tile glue is good, it is easy to cause mosaic corrosion after the paving is completed, and the glazed ceramic mosaic tile cannot be guaranteed. Beautiful.

Consider the construction thickness

There are differences in the thickness of glazed ceramic mosaics, ranging from two millimeters to five millimeters. Some mosaics of special materials can even reach one centimeter. In addition, the thickness of glazed ceramic mosaics is different from that of ceramic tiles. Therefore, to make the wall flat as a whole, it is sometimes necessary to consider a new leveling layer in a thinner area.

The spacing of construction joints should be even

The gap between the gaps between the pieces of glazed ceramic mosaics must be even, and the gap should be equal to the original gap between the small pieces of glazed ceramic mosaics so that the entire wall looks like a single piece. It is made up of large pieces of mosaic molds.

Prepare the construction rhythm

During the paving process of glazed ceramic mosaics, there may be phenomena such as slipping, the whole piece slipping, etc. These conditions are generally caused by the unsure of the construction rhythm. It is better to wait for the last batch of cement to solidify a bit, and then paste the next batch on top, then the effect of the paving will be better.

Jointing with a caulking agent

Nowadays, jointing agents are generally used for jointing. Wipe it with wet white cement first, then use dry cement to make it solidify as soon as possible, and finally wipe it with a dry towel. The effect of the glazed ceramic mosaic wall is more uniform, and the decorative effect is much stronger than that of the block material. Because no construction joints can be seen.

After shop care

After the paving of glazed ceramic mosaic is completed, attention should be paid to the protection of the finished product and proper air drying can be carried out. The surface layer just paved should be avoided from sun exposure, and the room should be properly ventilated until 24 hours after the handover.

Foshan Connfly Decoration Materials Co., Limited was established in 2008 and is a company specializing in the production and sales of glazed ceramic mosaics. All products undergo several performance tests before they leave the factory. If you are interested in our high-quality products, you can contact us. Our website is https://www.connfly-mosaic.com/.