Production and construction of waterjet marble mosaic

Waterjet marble mosaics have various shapes, which are durable and versatile. The waterjet marble mosaic made of pure natural, non-artificial stone, no skin or printing, retains the most natural stone texture. Waterjet marble mosaic conforms to popular artistic ideas and is widely used to decorate walls and floors. Next, let us talk about the production and construction of waterjet marble mosaics in detail. Here are some answers.

Here is the content list:

• Production process. 

• Construction tutorial. 

Production process. 

A CAD drawing will be done first. We have a rich library, and various styles of waterjet marble mosaics can be customized according to customers' preferences. Second, perform waterjet cutting. Advanced machinery and equipment can cut various natural stones into independent pattern components. Third, perform splicing and assembly. Workers spliced each independent waterjet marble mosaic component into a whole. Fourth, carry out overall reinforcement and protection at the bottom. Epoxy resin, fiberglass mesh, and rough river sand can simultaneously strengthen the bottom adhesion. Fifth, polishing and polishing. The delicate polishing makes the surface of the waterjet marble mosaic warm and natural. Finally, typesetting and packing are carried out. The custom-made cartons and custom-made wooden frames are used to provide all-around protection for the waterjet marble mosaic products, which are safe and secure.

Construction tutorial. 

First of all, choose the place where you want to lay the marble mosaic with the water jet, put a layer of mud on the chosen place, and use a grey knife to smooth the cement on the board to make the surface smooth and smooth. Secondly, use a professional gray knife to scrape the 2-3mm thick adhesive, and use a toothed knife to scrape the gray bottom of the texture pattern, and scrape the surface into a uniform and textured surface. Then paste the waterjet marble mosaic on the wall one by one in order. Third, when laying waterjet marble mosaics, pay attention to the width of the seams between the stickers and the product's mesh. After the entire pattern is pasted, tap it with a sponge knife and level it to ensure that the bottom surface of the water jet marble mosaic is fully combined with the glue. Fourth, tear off the transparent film paper on the surface of each sticker, use a dry and clean sweep to clean up the debris in the seam, and then check whether the overall pattern is properly pasted and aligned. Fifth, about 20 hours, after the adhesive is dried and solidified, use a professional sponge dust knife to fill the gap with a suitable caulking material. Pay attention when using a sponge knife to fill the gaps. Use a little bit of force to make sure that every gap is filled to fullness and there is no excess. At the same time, the caulking area should not exceed 2 square meters each time, so as not to cause cleaning difficulties. Finally, for about half an hour, when the caulking agent is in a semi-dry and wet state, use a high-density sponge to wipe into the 1-2mm recessed seam, which can better highlight the highlight effect of the edges and corners of the waterjet marble mosaic product, and then use a dry towel to clean and complete the construction. After the paving is completed, check the overall effect.

Our official website is https://www.connfly-mosaic.com/. If you are interested in our waterjet marble mosaic products, please feel free to contact us. Our cost-effective products are well received by the public.