1. Daily cleaning of ceramic tiles can be done with detergent, soap, etc.
2. Add a little ammonia and turpentine mixture with soap to clean the tiles to make the tiles more shiny.
3. If there are scratches on the brick surface, you can apply toothpaste on the scratches and wipe them with a dry cloth to repair them.
4. Use decontamination cream to remove dirt from time to time between bricks and bricks, and then brush a layer of waterproofing agent on the gaps to prevent mold growth.
5. Use sodium hydroxide or potassium bicarbonate solution for pollutants such as tea, coffee, beer, ice cream, and oil.
6. Use dilute solutions such as hydrochloric acid and nitric acid for pollutants such as ink and cement.
7. Use special cleaners for paints, coatings and other pollutants.
8. After the rust can be ground into powder with 3-4 vitamin C tablets, sprinkle it on the surface of the floor tiles, and then wash it several times with water.
9. All kinds of glue can be removed with banana water. Pure banana water is a colorless, transparent, volatile liquid and flammable. It is mainly used as a solvent and thinner for spray paint.
1. Anti-cracking: Do not use metal sharps, glass ceramics, iron nails and other hard objects to hit or rub the ground in daily use. Do not drag weight objects on the ground to avoid scratching the glaze and affecting the appearance.
⒉. Anti-scratch: If there are slight scratches, apply toothpaste around the scratches, wipe with a soft and clean dry cloth repeatedly, and then apply a small amount of floor wax, and then polish with a clean cloth to achieve the brightness as new Effect. If the damage is serious, it should be replaced in time or repaired by professionals.
3. Anti-moisture: It is best to open doors and windows immediately after cleaning to allow air to circulate and dry the moisture on the tile wall. In the humid summer weather, you can wipe it again with a dry cloth, and then turn on the air conditioner to dehumidify.
4. Anti-stain: For general stains, it can be treated with a soft dry rag. If you encounter stains that must be cleaned with water, it is recommended to use a rag that is soaked and wrung until it does not drip.
5. Anti-mold: The gaps between the tiles can be cleaned with decontamination cream from time to time, and then a layer of waterproofing agent is applied to the gaps with a brush to prevent the growth of molds.
1. Kitchen
Clean oil stains: The oil stains on the kitchen walls are easy to dry and not easy to clean, especially in summer. In this regard, if the oil stains on the tiles or crevices are really thick, you can use a shovel to shovel it, or use a steel wire ball to clean it first. After the stain is thinned, clean it with a cleaner containing acid or dissolved ingredients.
Anti-oil stains: paste anti-oil stain stickers on the heavy oil stains, use the beautifying agent in the gaps of the tiles, and apply them to the joints of the tiles, which is beautiful and resistant to oil stains. You can also stick toilet paper or paper towels on the tiles and spray cleaner on them to help the tiles "apply a mask". This will not only prevent the detergent from dripping everywhere, but also make all the oily dirt stick to the paper towel.
2. Bathroom
Clean soap scale: For the accumulation of soap scale on the bathroom wall, you can wash it with warm water first to dissolve the soap scale partly, and then use a brush to gently wipe it off. In addition, you can also use sulfuric acid or hydrochloric acid solution, drop it on the brick surface, let it stand for a few minutes and then wipe it.
Defend soap dirt: the stains left by soap can be avoided. After daily bathing, wipe out the soap foam on the wall in time; in addition, you can apply a layer of antifouling agent on the tiles in the corners of the bathroom , Can effectively avoid soap scum.
3. Behind the faucet
Cleaning the rust: A layer of rust is prone to appear on the water pipes and ceramic tiles behind the faucet in the home. It can be washed with 2% oxalic acid solution to remove it, and then wipe it with clean water. You can also use 3-4 vitamin C tablets to be ground into a powder, sprinkle it on the surface of the tile, and then scrub with water several times to remove rust stains.
Anti-rust: For the tiles behind the water pipes that are easy to rust, you can use anti-rust agents or professional rust removers to prevent rust and remove rust; in addition, you can also partially polish and film the tiles that are easy to rust. , Apply grease, anti-rust oil and other methods to prevent rust.
1. Clean up after paving: When the adhesive layer and jointing mortar are finally set, you can start to clean the mosaic surface. The cleaning work needs to prepare two buckets, one for new detergent and one for clean water. Soak the cloth in the cleaning agent bucket, do not wring it dry, and then wipe the mosaic surface in a circular manner: then soak the sponge in the second bucket with clean, and then wipe the mosaic surface with the sponge to wipe off all Residues, finally, sponge the surface again until it is clean.
2. Check the details after paving: After all the walls are paving, the adhesive layer is finally set, and the jointing is completed, do another check. Use a clean, damp, soft brush for the floating sand left in the seams. Gently take out, the excess mile strips should be leveled tightly with 1:1 cement mortar, then wiped with a cloth, and cleaned after the bonding layer and the joint mortar are finally set.
3. Do a good job of ventilation after the paving: After the mosaic paving is completed, pay attention to the protection of the finished product. You can carry out proper airflow. Avoid sun exposure on the surface layer just finished. The indoor should be properly ventilated until About 24 hours after the handover, the post-maintenance of the mosaic tiles should generally be no less than 7 days.
2. Daily cleaning and maintenance of ceramic mosaic:
1. Daily cleaning of mosaic:
(1) Wipe with clean water cotton cloth: you can wipe it with clean water and a good absorbent cotton cloth to clean it. Because the surface of the mosaic is relatively flat, it is not easy to hide dirt, so it is very convenient when cleaning. In addition, you can also use a neutral brightener to wipe, which helps the mosaic surface to keep bright.
(2) Scrubbing with detergent: If it is the floor and there is no drainage system on the ground, first take a vacuum cleaner and then add water with the detergent and wipe it with a wrung rag. Basically, it is almost the same. If it is the floor of the shower room, there is a kind of spraying directly after the shower every day, and it is necessary to use a soap-removing function.
2. Daily maintenance of mosaics: There are several points to be paid attention to in the daily maintenance of mosaic walls and floors. One is to prevent heavy objects from hitting; second, if there are mosaics falling off or missing, they need to be patched with mosaics of the same variety; third is daily attention Clean it in time, clean it easily at ordinary times, and clean it once a week.